Maintenance basics
"The cost of flooring"=8%+92%
According to a survey on the usage of PVC flooring in the European and American markets, the value of the flooring only accounts for 8% of the total cost The remaining 92% are for post maintenance costs (waxing, polishing)
Mary''s unique "PUR non waxing strengthening treatment" technology makes floor materials non waxing and low maintenance, thereby reducing workload, environmental protection, less pollution, and economy
How to save money=reduce expenses by 92%!
★ Approximately 80% of dust and pollution are brought from outside
★ The first step in cleaning is to prevent external pollution
★ Install a "dust blanket" at the entrance. It can effectively prevent 90% of dust and dirt from entering the room.
PVC plastic flooring is beautiful and simple, and to maintain its beauty, one should grasp the key points. Among them, daily maintenance is the most basic, mainly consisting of the following five points
Maintenance 1: Rotating floor mats at entrances and other areas to remove sand and gravel from the soles of shoes can reduce damage to plastic flooring
Maintenance 2: Regular use of wax to maintain the surface of the floor can effectively protect the plastic floor and polish it
Maintenance 3: Use neutral detergent and a semi dry mop to clean surface contamination (dripping glue, etc. can be removed with 95% alcohol)
Maintenance 4: Clean the floor every day and use a slightly damp mop to clean the surface of the plastic floor
Maintenance 5: Avoid direct exposure to strong light and prevent UV radiation to prevent discoloration and fading of plastic flooring.
Cleansing Tips
The best time to remove dirt from plastic flooring is to wipe it off with a cloth before the stains are completely dry, and then clean the floor with water. The pollution situation is closely related to the composition and color of the stains, as well as the temperature at that time. The general principles are:
① Use a scraper to scrape off the mixture of stains. Remember not to use sharp tools to avoid scratching the surface of the plastic floor
② First, use a cloth to absorb the stains and then perform the following cleaning work to prevent the stains from spreading
③ The order of cleaning stains should be from the outside to the inside, rinse with a sponge block that absorbs water, and do not use hot water.
1.To avoid scratching the PVC floor with sand particles on the soles of shoes, it is recommended to lay a dust-proof carpet at the entrance and exit of the door to prevent sand particles from entering the soles.
2.Timely remove sand particles and hard debris from the surface of the floor, and use a dry and damp cloth to wipe away stains.
3.Clean the floor 1-2 times a day and use a slightly damp mop to clean the surface of the plastic floor. For difficult to remove stains, try applying PVC floor cleaning agent to the floor surface, wait for a few minutes, and then use a softer plastic brush to clean.
According to a survey on the usage of PVC flooring in the European and American markets, the value of the flooring only accounts for 8% of the total cost The remaining 92% are for post maintenance costs (waxing, polishing)
Mary''s unique "PUR non waxing strengthening treatment" technology makes floor materials non waxing and low maintenance, thereby reducing workload, environmental protection, less pollution, and economy
How to save money=reduce expenses by 92%!
★ Approximately 80% of dust and pollution are brought from outside
★ The first step in cleaning is to prevent external pollution
★ Install a "dust blanket" at the entrance. It can effectively prevent 90% of dust and dirt from entering the room.
PVC plastic flooring is beautiful and simple, and to maintain its beauty, one should grasp the key points. Among them, daily maintenance is the most basic, mainly consisting of the following five points
Maintenance 1: Rotating floor mats at entrances and other areas to remove sand and gravel from the soles of shoes can reduce damage to plastic flooring
Maintenance 2: Regular use of wax to maintain the surface of the floor can effectively protect the plastic floor and polish it
Maintenance 3: Use neutral detergent and a semi dry mop to clean surface contamination (dripping glue, etc. can be removed with 95% alcohol)
Maintenance 4: Clean the floor every day and use a slightly damp mop to clean the surface of the plastic floor
Maintenance 5: Avoid direct exposure to strong light and prevent UV radiation to prevent discoloration and fading of plastic flooring.
Cleansing Tips
The best time to remove dirt from plastic flooring is to wipe it off with a cloth before the stains are completely dry, and then clean the floor with water. The pollution situation is closely related to the composition and color of the stains, as well as the temperature at that time. The general principles are:
① Use a scraper to scrape off the mixture of stains. Remember not to use sharp tools to avoid scratching the surface of the plastic floor
② First, use a cloth to absorb the stains and then perform the following cleaning work to prevent the stains from spreading
③ The order of cleaning stains should be from the outside to the inside, rinse with a sponge block that absorbs water, and do not use hot water.
1.To avoid scratching the PVC floor with sand particles on the soles of shoes, it is recommended to lay a dust-proof carpet at the entrance and exit of the door to prevent sand particles from entering the soles.
2.Timely remove sand particles and hard debris from the surface of the floor, and use a dry and damp cloth to wipe away stains.
3.Clean the floor 1-2 times a day and use a slightly damp mop to clean the surface of the plastic floor. For difficult to remove stains, try applying PVC floor cleaning agent to the floor surface, wait for a few minutes, and then use a softer plastic brush to clean.
Daily cleaning
◆ Dry/semi wet mopping;
◆ If necessary, add an appropriate amount of neutral cleaning agent to clean water;
◆ Do not use too much water to clean the floor.
Regular cleaning
◆ Spray cleaning: use a specialized floor scrubber+beige cleaning pad+neutral cleaning agent;
◆ The floor can be cleaned and refurbished at the same time.
Every three months, use a cleaning machine with a red cleaning pad and clean with neutral cleaning solution.
1. Push or vacuum to clean.
2.Dilute the floor cleaning and polishing agent with water at a ratio of 1:20, then mop the floor or use a high-speed polishing machine with red grinding discs for polishing.
3.Apply 1-2 layers of high-strength surface wax.
4. As needed, it can be polished with a high-speed polishing machine and a white polishing pad.
Cleaning agent: Floor cleaning and polishing agent, high-strength surface wax tool: Dust pushing and grinding machine, red and white grinding discs, water absorption machine, wax dragging and squeezing machine
Periodic maintenance
◆ Dry Burnishing - Refurbishing old flooring;
◆ High speed polishing machine+beige cleaning pad, no cleaning agent required.
Special sewage treatment
1.Oil stains: Local oil stains, pour the original liquid of water-based degreaser directly onto a towel to wipe; Large area oil stains, dilute the Weite water-based degreaser at a ratio of 1:10, and use a floor scrubber with a red grinding disc to clean at low speed.
2.Black offset printing: Polish with spray cleaning and maintenance wax, combined with a high-speed polishing machine and a white polishing pad. For long lasting black offset printing, a strong black offset printing remover can be directly poured onto a towel for wiping treatment.
3.Glue or chewing gum: Use a professional strong adhesive remover to directly pour it onto a towel and wipe it off.
Cleaning agent: water-based degreaser, spray cleaning and maintenance wax, strong black offset remover, strong adhesive remover.
2.Black offset printing: Polish with spray cleaning and maintenance wax, combined with a high-speed polishing machine and a white polishing pad. For long lasting black offset printing, a strong black offset printing remover can be directly poured onto a towel for wiping treatment.
3.Glue or chewing gum: Use a professional strong adhesive remover to directly pour it onto a towel and wipe it off.
Cleaning agent: water-based degreaser, spray cleaning and maintenance wax, strong black offset remover, strong adhesive remover.